Ideal for monitoring air quality outside or in workshops, TES Small Form AQMS measures key parameters:

Air pollutant concentrations: PM₁, PM_2.5, PM₄, PM₁₀, TSP, O₃, NO, NO₂, O3, CO, SO₂, H₂S, NH₃, HCHO, Cl₂, HCl, VOC, CH₄, CO₂ – other gases available on request

Meteorological parameters: temperature, pressure and relative humidity

Other parameters: noise, vibration and odour

Location: GPS

The device captures data in real-time and transfers them wirelessly to a advanced web platform, for data analysis and data management, remote control of the equipment and data integration into websites, software and smart city platforms.

Small form stations are light, compact and easy to install within just a few minutes. Once the stations are connected to the Internet through several communication links on-demand (Wi-Fi, 3/4G, LoRa, Zigbee…), the hyper-localised information is automatically transferred to a secure web platform that is accessible 24 hours a day.

Customize your own Small Form AQMS that meets your needs:

Options:

• Integrate sensors that you need
• Choose your communication link
• Add a back-up battery 

Accessories:

• Solar panel and batteries
• Heating resistance
• Mounting plate

For a wide range of applications:

Smart cities, industrial sites, mining sites, sewage treatment plants, mines, soil remediation, refineries, workshops, warehouses, worksites, road networks, race tracks, ski, and sea resorts.

The post TES SMALL FORM AIR QUALITY MONITORING SYSTEMS (AQMS) appeared first on Thomson Environmental Systems.

Key features include:

• Mains, Battery or Solar Powered
• TES EPA Mode: Schedule “hours on” and “hours off” to set automatic 3 or 6 day runs and eliminate the need for manual start/stops.
• Lufft Weather Sensor Compatibility: Eliminate the need for additional data loggers by using the FMP5000 to log all met parameters
• Available to rent or purchase!

Download Brochure

The post Filter Master Pro 5000 by TES appeared first on Thomson Environmental Systems.

SKYPOST X is the evolution of the established and long manufactured SKYPOST PM FX.

SKYPOST Xis an automatic outdoor Sampler for particulate monitoring using 47mm diameter filter membrane.

The sequential filter exchange system of the filter membranes with up to 32 filter holders storage capacity, and the electronic flow rate controller, allow continuous, unattended operations up one month, as well as an easy replacement of the exposed filters without sampling stand-by.

SKYPOST X flow range is 5 to 60 L/min and is suitable for dust sampling with LVS PM10 2.3 m3/h sampling head and LVS PM2.5 2.3 m3/h sampling head, according to EN12341:2023. LVS PM1 2.3 m3/h sampling head is also possible.

The new flow control system is composed by a venturi flow sensor as measure device (accuracy better than 2%) and a pump speed control system to regulate the sampling flow. Adopting this new concept the MTBF has been strongly improved. This means very low maintenance especially with 24/7 running time!

The modularity of the sampling head positioning allows to use the USEPA 40, CFR Part 50 sampling head as well.

The completely straight suction tube with its round shape and the separation of the storage filter zone from internal and radiant source of heat, allow to collect and keep the integrity of the pollutants accumulated.

Data Management System

Skypost X has a new data management system with the following features:

• Continuous sampling data storage of all parameters in the internal memory
• Min., max and average values of all the measured data
• Alarm management
• Data download via USB, wifi app, bluetooth
• Data export into TXT format file (imported from excel and other spreadsheet program)
• MODEM for data download and sampler control. For any alarm an email or sms is sent to the end user in order to verify the reason and
  act accordingly.

Filter X Cooler Technology

FilterX – Cooler is the cooling system for sampled filters storage of SKYPOST X, designed according to EN12341:2023 requirements.
FilterX – Cooler, technology thanks to its smart temperature control gives an optimal protection of sampled filters avoiding their exposition to heat and to water condensation.

Main Characteristics

• Fully compliant with EN12341:2023; EPA 40 CFR 50 appendix L, EPA 40 CFR 50 appendix J
• Up to 32 filter load and storage
• Weather proof IP55
• Sound pressure level under 32 dB(A) operating temperature from -30°C up to 50°C
• Operating humidity 0:100 % rH
• Sampled filters temperature control system in order to regulate the temperature below 23°C with external temperature up to 50°C (EN12341:2023 requirement)
• Sampling probe ventilation system in order to ensure a differential temperature between filter holder and outdoor temperature under 5 °C (EN12341:2023 requirement)
• Automatic digital flow control with venturi type sensor
• Volumetric flow rate measured by venturi device with an accuracy under 2%.
• Measuring sensors for:
  • Atmospheric pressure;
  • Pressure drop on filter
  • Ambient temperature
  • Relative humidity (optional)
  • Outdoor CO2 (optional)
  • Outdoor pollutants such as NOx, SO2, O3, VOC’S (optional, other on request)
  • Ultrasonic wind speed/direction ad other meterological sensors (optional)
  • Real time PM10, PM2.5, PM1 and 24 dimensional classes (optional)

• Data download and control by: USB, Ethernet, RS485, RS232
• Pump maintenance over 16.000 Hours
• Filter 47 mm – Free area of sampling 40 mm.

Technical Characteristics

Download Brochure

The post TECORA Skypost X appeared first on Thomson Environmental Systems.

The advanced pump system provides accurate data with quiet operation due to consistent 5LPM flow rate and pulsation dampening technology.

The 5LPM flow rate ensures even heavier particles remain entrained to be collected onto the 37mm filter paper giving highly accurate results.

On-site operation is made easy with the quick deploy design, graphical display and dedicated keypad with intuitive menu.

New and extremely powerful Visual Master Pro software makes remote operation a breeze with live data viewing, data download and complete instrument control allowing you to adjust settings, start and stop monitoring, set alarms/alert thresholds and more, all from the comfort of your office.

Key features include:

• Easy field calibration available via Automatic Field Calibration Mode
• Heated inlet and Moisture trap: Eliminates moisture interference on readings and chance of water damage.
• Simultaneous measurement of Total PM, PM10, PM4, PM2.5 and PM1.
• TES EPA Mode: Schedule “hours on” and “hours off” to set automatic 3 or 6 day runs and eliminate the need for manual start/stops.
• Lufft Weather Sensor Compatibility: Eliminate the need for additional data loggers by using the DMP7000 to log all met parameters.
• RH controlled heated inlet along with a unique in-line water trap eliminates moisture interference
• Annual factory service recommended. No other maintenance required
• Mains, battery or solar power option
• New Battery Box delivers major improvements in data capture, reliability and validity
• In-built data logging capability
• Remote data access via modem
• Optional visual and audio alerting system, SMS, and email alerts
• Available to rent or purchase!

Download Specifications

The post Dust Master Pro 7000 by TES appeared first on Thomson Environmental Systems.