Features and functions:

• View live real-time data
• Download data
• Adjust instrument setting
• Start/stop monitoring
• Configure your compact weather station
• Program EPA Mode
• Configure alarm thresholds
• Set logger intervals.

Compatible with the QAMs by TES range of dust and meteorological monitoring equipment

• Met Master Pro 1000 Meteorological Data Logger
• Filter Master Pro 5000 Low Volume Gravimetric Sampler
• Dust Master Pro 7000
• High Volume Master Pro

Download Brochure

The post QAMS Visual Master Pro Software by TES appeared first on Thomson Environmental Systems.

Key features include:

• Mains, Battery or Solar Powered
• TES EPA Mode: Schedule “hours on” and “hours off” to set automatic 3 or 6 day runs and eliminate the need for manual start/stops.
• Lufft Weather Sensor Compatibility: Eliminate the need for additional data loggers by using the FMP5000 to log all met parameters
• Available to rent or purchase!

Download Brochure

The post Filter Master Pro 5000 by TES appeared first on Thomson Environmental Systems.

It incorporates advanced programming functions and electronic volumetric flow control to maintain a consistent flow and collect a truly representative sample of particulate matter.

Using a precise and versatile venturi sampling system, featuring electronic flow control. The HVPS meets the most recent international methods for atmospheric particulate matter measurement, including AS/NZ 3580.9.6,  AS/NZS 3580.9.3 and AS/NZS 3580.9.14.

On-site operation is made easy with graphical display and dedicated keypad with intuitive menu.

RS232 output for data collection and remote communication. Simple programming of sampling periods, including daily and weekly programs, with in-built ‘1-in-X day’ sampling capability.

Key features include:

• EPA Mode: Schedule “hours on” and “hours off” to set automatic 3 or 6 day runs and eliminate the need for manual start/stops
• Lufft Weather Sensor Compatibility: Eliminate the need for additional data loggers by using the HVMP to log all met parameters
• TSP, PM10 or PM2.5 monitoring
• Housed in a weatherproof enclosure for outdoor sampling in a range of environments.
• Directional sampling – Wind direction and speed used to activate / de-activate sampler.
• Low power consumption – long life blower motor with low noise operation.
• Available to rent or purchase!

The post High Volume Particulate Sampler appeared first on Thomson Environmental Systems.

All gauges are constructed from high quality materials and are designed to last in the rugged outdoor environment.

TES’s Standard DDG is a low cost, rugged and reliable dust deposition gauge for monitoring in accordance with AS 3580.10.1. The unit comes with: glass bottle, glass funnel, rubber stopper and bird ring.

Mounting options includes heavy duty tripods and picket stands to meet Australian standard positioning of 2 ± 0.2m for funnel heights. Grade A glass is used for both our funnels and collection bottles. We supply 5L collection bottles to allow for high rainfall to be collected and not invalidate samples.

Relevant standards specify exposure periods are to be 30 ± 2 days.

The TES DDG can be partnered with one of our real-time dust monitoring instruments to provide users with both compliance and real-time measurements.

Applications

• Road and construction sites
• Industrial applications
• Remediation works
• Agricultural areas
• Landfill in urban areas
• Mining operations.

Download Data Sheet

The post TES Dust Deposition Gauge (DDG) appeared first on Thomson Environmental Systems.

All gauges are constructed from high quality materials and are designed to last in the rugged outdoor environment.

The TES DDDG is an omni-directional dust deposition gauge capable of measuring dust deposition in 4 directions. It is ideal for companies seeking monitoring in accordance with AS 3580.10.2:2013. The unit is capable of gravimetric measurements only with the sample later analysed in an approved laboratory. The TES DDDG may also be partnered with one of our real-time monitoring systems to provide users with real-time data.

How it works

Localised dust levels can be accurately measured using a combination of exposure periods with the mass of deposited matter. Data is collected to evaluate the effects of dust-causing activities for both compliance and internal use.
TES use NATA-certified laboratories to categorise the type of particulate (combustible to non-combustible matter), however collected samples can be further analyzed upon request.

Applications

• Road and construction sites
• Industrial applications
• Remediation works
• Agricultural areas
• Landfill in urban areas
• Mining operations.

Download Data Sheet

The post TES Directional Dust Deposition Gauge (DDDG) appeared first on Thomson Environmental Systems.

• Lufft Smart Weather Sensors
• TES Met Master Pro 1000 Data Logger
• 2m or 10m Mast
• Modem for Remote access and SMS alerts
• Mains or Solar Power

Available Parameters with Lufft All-in-one Sensors: Wind Speed and Direction, Temperature, Relative Humidity, Air Pressure, Precipitation, Solar Radiation and Lightning. TES Met Master Pro 1000 Key Features: User friendly and reliable, Push or poll data, CSV data format, two programmable relays, Visual Master Pro software for remote live data viewing and download, and instrument control and programming. Visit our Lufft Sensors and MMP1000 webpages for more details or contact us for RENTAL or PURCHASE pricing and Dust Monitor integration options.

Download Specifications

The post TES Automatic Weather Stations appeared first on Thomson Environmental Systems.

Key MMP1000 features include:

• User friendly and reliable
• Push or poll data
• Variable averages
• CSV data format
• Two programmable relays for process control or alarms and alerts
• Ultimate remote control with Visual Master Pro software.

Contact us for RENTAL and PURCHASE pricing.

Visit our Lufft Sensors and Automatic Weather Stations webpages

Download Specifications

The post QAMS Met Master Pro 1000 Data Logger appeared first on Thomson Environmental Systems.

The advanced pump system provides accurate data with quiet operation due to consistent 5LPM flow rate and pulsation dampening technology.

The 5LPM flow rate ensures even heavier particles remain entrained to be collected onto the 37mm filter paper giving highly accurate results.

On-site operation is made easy with the quick deploy design, graphical display and dedicated keypad with intuitive menu.

New and extremely powerful Visual Master Pro software makes remote operation a breeze with live data viewing, data download and complete instrument control allowing you to adjust settings, start and stop monitoring, set alarms/alert thresholds and more, all from the comfort of your office.

Key features include:

• Easy field calibration available via Automatic Field Calibration Mode
• Heated inlet and Moisture trap: Eliminates moisture interference on readings and chance of water damage.
• Simultaneous measurement of Total PM, PM10, PM4, PM2.5 and PM1.
• TES EPA Mode: Schedule “hours on” and “hours off” to set automatic 3 or 6 day runs and eliminate the need for manual start/stops.
• Lufft Weather Sensor Compatibility: Eliminate the need for additional data loggers by using the DMP7000 to log all met parameters.
• RH controlled heated inlet along with a unique in-line water trap eliminates moisture interference
• Annual factory service recommended. No other maintenance required
• Mains, battery or solar power option
• New Battery Box delivers major improvements in data capture, reliability and validity
• In-built data logging capability
• Remote data access via modem
• Optional visual and audio alerting system, SMS, and email alerts
• Available to rent or purchase!

Download Specifications

The post Dust Master Pro 7000 by TES appeared first on Thomson Environmental Systems.