Teledyne API Archives - Thomson Environmental Systems

TELEDYNE API Model T700U Trace-level Dynamic Dilution Calibrator (TAPI)

thomson-admin — Wed, 30 Oct 2024 01:43:08 +0000

The Model T700U is a microprocessor based calibrator for precision, trace-level gas analyzers. Using highly accurate mass flow controllers combined with compressed sources of standard gases, calibration standards are provided for multipoint span and zero checks using up to 4 gas sources.

In addition to the features of the Model T700, the Model T700U is designed for the demanding requirements of trace-level measurements. The ability to calibrate and verify linearity for NO₂ at levels below 50 ppb is difficult with standard calibrators. To overcome this limitation, the Model T700U ozone generator operates in two modes; a high range with similar performance to the Model T700 ozone generator, and a low range, or “fractional” mode, for producing accurate ozone levels down to 3 ppb. To ensure the highest accuracy of NO₂ output, the calibrator measures the ozone concentration prior to performing a GPT, and the range is selected automatically by the Model T700U based on ozone concentration and flow specified by the user.

All T Series instruments offer an advanced color display, capacitive touch screen, intuitive user interface, flexible I/O, and built-in data acquisition capability. All instrument set up, control and access to stored data and diagnostic information is available through the front panel, or via RS232, Ethernet, or USB com ports either locally or by remote connection.

The Model T700U comes with NumaView Software. NumaView Remote PC Software allows for a remote connection with virtual interface and data downloading capability to analyzers operating NumaView Software.

Features

Stable and accurate ozone output to 3 ppb
Stable and accurate Gas Phase Titration (GPT) to 3 ppb NO₂
Built-in photometer, ozone generator, and GPT chamber
Large, vivid, and durable color graphics display with touch screen interface
Ethernet, RS-232, and (optional) USB com ports
Front panel USB connections for peripheral devices and firmware upgrades
12 independent timers for sequences
Nested sequences (up to 5 levels)
Software linearization of mass flow controllers (MFC)
4 calibration ports (configurable for single or multi-blend gases)
3^rd MFC for wide dynamic range (optional)
Glass gas phase titration chamber (GPT)
Inlets for external ozone reference sources
Two-year warranty.

Download Specifications

The post TELEDYNE API Model T700U Trace-level Dynamic Dilution Calibrator (TAPI) appeared first on Thomson Environmental Systems.

TELEDYNE API T701H Zero Air Generator

thomson-admin — Tue, 29 Oct 2024 21:59:58 +0000

The T701H adds Modbus TCP/IP connectivity to the proven reliability and performance of our high purity zero air system. This allows remote monitoring of key instrument functions including dewpoint status, scrubber temperature, box temperature and output pressure. Additionally, this digital access provides the ability to remotely disable the internal pump, allowing longer service intervals and less power consumption. The user can also remotely start instrument warm-up prior to arrival at the site.

The T701H is a fully self-contained source of high purity zero air for dilution calibrators. It is ideal for use with highly sensitive analyzers in ambient background and trace level applications. The T701H includes a dewpoint sensor, an oil and diaphragm-free pump, scrubbers to remove SO2, NO, NO2, O3, H2S and NH3, plus high performance scrubbers to remove CO and Hydrocarbons.

The regenerative, heatless dryer removes water and produces output with a dew point less than -40ºC (up to 30 SLPM flow rate). The system’s pressure, temperature, and dewpoint values are all continuously monitored, which allows a microcontroller to adjust the pump cycling frequency, valve timing, and heater power for optimal performance

Features

Modbus Connectivity
Trace Level output purity
Dewpoint Sensor
Once/year maintenance interval
Regenerative, heat-less dryer for maintenance-free water removal
Long-life scrubbers for SO₂, NO, NO₂, O₃, H₂S and NH₃
High performance CO/Hydrocarbon scrubber
Automatic water drain
Automatic pump control with demand tank
Two-year warranty.

Download Specifications

The post TELEDYNE API T701H Zero Air Generator appeared first on Thomson Environmental Systems.

TELEDYNE API T102 TRS

thomson-admin — Wed, 16 Oct 2024 06:13:43 +0000

The Model T102 TRS analyzer uses the proven UV fluorescence principle to measure Total Reduced Sulfur (TRS) at levels commonly required for ambient air monitoring.

The Model T102 uses a high temperature external converter set at 850°C to allow conversion of H₂S, methyl mercaptan, dimethyldisulfide, and methyl-disulfide to SO₂ at this temperature with efficiency greater than 98%. A switching option alternately measures TRS and SO₂ while showing both readings concurrently on the front display.

The Model T102 comes with NumaView Software. NumaView Remote PC Software allows for a remote connection with virtual interface and data downloading capability to analyzers operating NumaView Software.

Features

Ranges: 0-50 ppb to 0-10 ppm TRS and up to 20 ppm SO2, user selectable
Large, vivid, and durable color graphics display with touch screen interface
Ethernet, RS-232, and (optional) USB com ports
Front panel USB connections for peripheral devices and firmware upgrades
8 analog inputs (optional)
Adaptive signal filtering optimizes response time
Temperature & pressure compensation
Auto zero system
Comprehensive internal data logging with programmable averaging periods
Ability to log virtually any operating parameter
Two-year warranty

Applications

Ambient Air Monitoring
CEMS – Stack Air Monitoring
Fenceline Air Monitoring
Semiconductor

Download Specifications

The post TELEDYNE API T102 TRS appeared first on Thomson Environmental Systems.

Model N901 THC/CH4/NMHC

thomson-admin — Fri, 11 Dec 2020 04:41:16 +0000

The Model N901 is a near-continuous hydrocarbon gas analyzer that measures the concentration of Methane (CH₄) and Total Hydrocarbons (THC) in air. The concentration of the non-Methane (NMHC) component is calculated by the subtraction of CH₄ from THC, with high sensitivity and accuracy. The hydrocarbons are measured using a Flame Ionization Detector (FID), in combination with gas chromatography (GC). The instruments range and performance are tuned specifically for use in ambient air quality monitoring assessments.

The Model N901 is designed for simple operation and maintenance with a modular hardware and electronics architecture. A long-life stainless-steel fritted filter is used at the sample intake to effectively remove particulate matter without introducing any gas-phase measurement artifacts. Instrument operation, calibration functions, chromatogram views, and data handling are all automated and controlled using the internal NumaView Software (NVS) interface, without the need for an external PC.

For remote connection to the N901 instrument, Teledyne API’s NumaView Remote PC-based Software provides a virtual interface, instrument controls, and data downloading capability to all TAPI analyzers operating NumaView Software.

Features

60s default cycle time
25 ppb LDL (CH₄, NMHC)
Fully programmable and automated directly from the instrument front panel interface
Modular internal hardware design for ease of maintenance
All internal components operate on 24VDC
Front panel USB connections for peripheral devices and firmware upgrades
Real-time chromatogram display during calibration routine
Real-time graphical displays of concentrations and diagnostic parameters
Comprehensive internal datalogging with programmable averaging periods
Ethernet and Serial outputs, standard
Analog output and digital I/O expansion (options)
Internal pressurized span valve for auto calibration (option)

Detector	Flame Ionization Detector (FID)
Method	Gas Chromatography with CH4 separation column
Ranges (Methane)	Min: 0-5 ppm Max: 0-1,000 ppm
Lower Detectable Limit	<25 ppb (Methane); <25 ppb (Propane)
Cycle Time	60 sec (minimum), user-definable
Precision	<1% of reading or 0.05 ppm (whichever is greater)
Linearity	<1% of full scale
Zero Drift	Zero baseline performed once per cycle
Span Drift (24hr)	<1% of full scale
Sample Flow Rate	60 cc/min + 10%
Carrier Gas	50 to 70 psi, N2 UHP Grade, Consumption 20 cc/min
Fuel Gas	50 psi ± 5%, H2 UHP Grade, Consumption 35 cc/min
FID Air	50 psi ± 5%, HC Free clean air, Consumption 350 cc/min
Auxiliary Air	70 psi ± 5%, Clean Dry Air, Consumption 1 cc/actuation
Included I/O	1 x Ethernet (TCP/IP) 1 x RS232 2 x front panel USB device ports
Optional I/O	Universal Analog Output Board includes (all user-definable): 4 x Isolated Voltage Outputs (5V, 10V; user-selectable) 3 x Individually Isolated Current Outputs (4-20mA) Digital I/O Expansion Board includes: 3 x Isolated Digital Input Controls 5 x Isolated Digital Output Controls (user-definable) 3 x Form C Relay Alarm Outputs (user-definable)
Dimensions (HxWxD)	7” x 17” x 23.5” (178 x 432 x 597 mm)
Weight	35 lbs (16 kg)
Operating Temperature	75-40°C
Power	100-240V, 50/60Hz, Typical Power 130W
Warranty	Two years

DOWNLOAD SPECIFICATIONS

The post Model N901 THC/CH4/NMHC appeared first on Thomson Environmental Systems.

TELEDYNE API 751H Portable Zero Air Generator (TAPI)

thomson-admin — Fri, 05 Jul 2019 05:59:40 +0000

The Model 751H is a portable, fully self-contained source of high purity zero air for dilution calibrators. It is ideal for use with sensitive analyzers in ambient background and trace level applications. Packaged in a wheeled, high density plastic case, the Model 751H provides ultra-high purity output with a warm-up time of 30 minutes.

The 751H includes a dew point sensor, a small, powerful pump, scrubbers to remove SO2, NO, NO2, O3, H2S, and NH3 plus high performance scrubbers to remove CO and Hydrocarbons. The regenerative heatless dryer removes water and produces output with a dew point of -20ºC (up to 10 SLPM flow rate).

The 751H features tank-less operation for real-time pressurised output without “pulsing.” A micro-controller cycles the regenerative dryer and pressurized drain and features a short cycle interval of 1 minute for high humidity applications.

Features

Rugged traveling case with wheels and retractable handle
Dew point indicator
Long life scrubbers for SO₂, NO, NO₂, O₃, H₂S, and NH₃
High Performance CO/Hydrocarbon scrubber
Regenerative, heat-less dryer for maintenance-free water removal
Automatic water drain
Once/year maintenance interval
Two-year warranty.

DOWNLOAD Datasheet

The post TELEDYNE API 751H Portable Zero Air Generator (TAPI) appeared first on Thomson Environmental Systems.

TELEDYNE API Model N500 CAPS NOx (TAPI)

thomson-admin — Fri, 05 Jul 2019 02:18:47 +0000

The Teledyne API Model N500 CAPS NOx analyser is a Cavity Attenuated Phase Shift (CAPS), non-chemiluminescent NOx analyser.

Using CAPS Spectroscopy to measure ‘true’ NO2, NOx and NO gases, the Teledyne API Model N500 provides an improved option for NO2, NOx and NO measurement accuracy and reduces instrument operation and maintenance costs.

CAPS technology is inherently accurate and sensitive, requires less maintenance than chemiluminescence and uses less power.

Teledyne-API’s first direct true NO2 analyser, the T500U has been a popular instrument with scientists and air quality specialists looking for a faster and more precise measurement of NO2 that cannot be offered by chemiluminescence.

The Model N500 like the T500U, uses CAPS technology for true NO2 measurement but it adds the ability to measure the NO component of NOx. The instrument combines direct NO2 measurements with highly efficient gas phase titration (GPT) to convert and measure the NO gas component.

The new Model N500 CAPS NOx / NO2 / NO analyser is available exclusively in Australia and New Zealand through Thomson Environmental Systems.

Download Specifications

Learn more

The post TELEDYNE API Model N500 CAPS NOx (TAPI) appeared first on Thomson Environmental Systems.

TELEDYNE API Model 430 Portable FEM Ozone Analyzer (TAPI)

thomson-admin — Mon, 19 Nov 2018 02:31:41 +0000

The Model 430 0₃ monitor uses the proven UV Absorption principle, producing accurate and stable O₃ measurements.
The small footprint and quiet operation make it extremely useful for ambient air and indoor air quality, surveying, and industrial hygiene applications.

Model 430 carries US EPA Federal Equivalent Method EQOA-1015-229 certification.

The Model 430 Compact O₃ Analyzer uses the proven UV Absorption principle, to produce accurate and stable O₃ measurements. The robust design and low power consumption makes it ideal for portable monitoring applications such as rural and remote monitoring, saturation studies, and atmospheric research.

The small footprint and quiet operation make it extremely useful for indoor air quality, surveying, and industrial hygiene applications. An optional battery pack provides up to 14 hrs of run time on a full charge.

Model 430 Features

Well-suited for portable, low power monitoring applications.
2.4 Kg weight and 10 x 18 x 26cm in size
Proven UV Absorption method used in Teledyne API’s range of popular Industrial Ozone products
High quality construction
Rugged and lightweight ABS polycarbonate chassis with handle
Wide operating range 0 – 100 ppb to 0 – 20,000 ppb (user-selectable) and Lower Detectable Limit < 2 ppb
US EPA Federal Equivalent Method EQOA-1015-229 certification.

Download Specifications

The post TELEDYNE API Model 430 Portable FEM Ozone Analyzer (TAPI) appeared first on Thomson Environmental Systems.

TELEDYNE API T100 SO2 Series (TAPI)

thomson-admin — Wed, 26 Sep 2018 10:35:32 +0000

The Model T100 uses the proven UV fluorescence principle, coupled with a state of the art user interface to provide easy, accurate, and dependable measurements of low level SO₂.

Exceptional stability is achieved with the use of an optical shutter to compensate for PMT drift and a reference detector to correct for changes in UV lamp intensity. A hydrocarbon ‘kicker’ and advanced optical design combine to prevent inaccuracies due to interferents.

All T Series instruments offer an advanced color display, capacitive touch screen, intuitive user interface, flexible I/O, and built-in data acquisition capability. All instrument set up, control and access to stored data and diagnostic information is available through the front panel using NumaView Software, or via RS232, Ethernet, or USB com ports, either locally or by remote connection using the included NumaView Remote PC Software.

The Model T100 comes with NumaView Software. NumaView Remote PC Software allows for a remote connection with virtual interface and data downloading capability to analyzers operating NumaView Software.

Download Specifications

The post TELEDYNE API T100 SO2 Series (TAPI) appeared first on Thomson Environmental Systems.

TELEDYNE API T101 H2S

thomson-admin — Wed, 26 Sep 2018 10:29:35 +0000

The Model T101 H2S analyzer uses the proven UV fluorescence principle to measure hydrogen sulfide at levels commonly required for ambient air monitoring.

The Model T101 is equipped with an internally mounted catalytic converter set at 315°C to convert H₂S to SO₂. A switching mode alternately measures H₂S and SO₂Download Specifications

The post TELEDYNE API T101 H₂S appeared first on Thomson Environmental Systems.

TELEDYNE API T500U NO2 CAPS (TAPI)

thomson-admin — Wed, 26 Sep 2018 10:22:03 +0000

The T500U CAPS NO₂ Analyzer represents the next generation of criteria pollutant monitoring technology for the direct measurement of Nitrogen Dioxide (NO₂) in air. The instrument utilizes a patented Cavity Attenuated Phase Shift (CAPS) technique to provide an extremely sensitive, fast and accurate NO₂ measurement in a cost effective and low maintenance instrument package.

The T500U provides a direct NO₂ measurement, eliminating the need for catalytic conversion or reagents which introduce measurement artifacts inherent in traditional heated metal converter based chemiluminescence instruments. The CAPS measurement approach also reduces maintenance items, and removes the need for hazardous materials and high temperature scrubbers within the instrument. The T500U has an expected maintenance interval of one year under typical ambient monitoring conditions.

All T Series instruments offer an advanced color display, capacitive touch screen, intuitive user interface, flexible I/0, and built-in data acquisition capability. All instrument set up, control and access to stored data and diagnostic information is available through the front panel, or via RS232, Ethernet, or USB com ports, either locally or by remote connection.

Features

USEPA Approved analyzers with a variety of ranges.
Touch screen with a selectable format and predictive diagnostics and internal logging.
Free remote software for total control
User-friendly engineering for operation and maintenance.
True, Direct NO₂ measurement
Extended maintenance interval
No converter or reagent required
No known ambient air interferences
Fast response
Exceptional measurement sensitivity
Low power consumption
Ranges: 0-5 ppb to 0-1 ppm, user selectable
Adaptive signal filtering optimizes response time
Temperature & Pressure compensation
All standard T-Series platform features
Two-year warranty

Download Specifications
Download Brochure

The post TELEDYNE API T500U NO2 CAPS (TAPI) appeared first on Thomson Environmental Systems.