The MIRA Ultra VOC is world’s smallest, uniquely portable, battery powered formaldehyde monitoring tool.

The Pico VOC provides precise and accurate formaldehyde concentrations via laser absorption spectroscopy in the middle infrared region, achieving unparalleled specificity and sensitivity at the 1ppb level in seconds. The distinct, middle infrared “fingerprint” of formaldehyde enables the rapid and quantitative detection of levels indoors, outdoors, or in test chambers, drastically reducing labor time and consumables associated with other methods. The ability to monitor this important carcinogen in real-time enables a wide range of new monitoring applications previously impractical due to traditional size, weight, cost, and accuracy constraints.

Key Features:

• Real-time 1ppb sensitivity and accuracy
• Autonomous, built-in calibration
• Fast 1Hz response time, out-of-the-box operation
• High accuracy GPS option for outdoor measurements
• Wifi, RS-232, and optional analog out
• Lowest, 15W power consumption
• Maintenance-free sensor core
• DNPH/HPLC level accuracy and precision without associated time and consumables
• Built-in 6hr battery, built-in sampling pump
• Compact, portable instrument suitable for fixed, mobile, and drone applications.

Real-Time HCHO Analysis for VOC Emissions

The MIRA Pico VOC is suitable for quantifying emissions from common sources including engineered wood products. Comparisons with ASTM methods quantify system accuracy and linearity from ppb to ppm levels. In addition to HCHO, Pico VOC systems also determine water vapour concentration and report HCHO dry-mole fractions. When used with an emissions chamber, the Pico VOC can determine outgassing rates accurately in minutes instead of hours, while eliminating wet chemistry steps associated with other methods. Total cost of ownership is greatly reduced with the Pico VOC, reducing technician time as well as consumables.

The MIRA Pico VOC truly represents a game-changing proposition for high accuracy HCHO monitoring applications.

Download Specifications

The post MIRA Pico VOC appeared first on Thomson Environmental Systems.

4000 Series Gas Chromatograph

The post 4000 Series Gas Chromatograph appeared first on Thomson Environmental Systems.

• Easy-to-use front panel interface with red 5-digit LED display and a vacuum fluorescent display (VFD), driven by microprocessor electronics
• High resolution, accurate readings of concentration
• Versatile analysis with three user-definable analysis ranges
• Microprocessor based electronics
• Two adjustable concentration alarms and a system failure alarm
• Extensive self-diagnostic testing at startup and on demand
• RS-232 serial digital port for use with a computer or other digital communication device
• Analog outputs for concentration and range identification (0-1 VDC standard and isolated 4-20 mA dc)

Series 4000 Overview

All 4000 series units employ the same basic architecture and electronics; however, each analyzer has additional features:

Series 4000 Hydrocarbon Analysers range brochure

The post Model 4020 Total Hydrocarbon Analyzer appeared first on Thomson Environmental Systems.

Series 4000 Overview

All 4000 series units employ the same basic architecture and electronics; however, each analyzer has additional features:

Series 4000 Hydrocarbon Analysers range brochure

The post Model 4030 Total Hydrocarbon Analyzer appeared first on Thomson Environmental Systems.

For stack testing and emissions monitoring, time is the most important resource; GT6000 Mobilis helps you save it.
Extreme portability, easy setup, fast results – the Gasmet GT6000 Mobilis portable FTIR multi-Component stack gas and emission analyzer is designed for Stack Monitoring with a list of features to make you more efficient.

Key benefits include:

• The first and only FTIR analyzer with MCERTS EN15267-4 certification
• Intuitive user interface and ergonomic design
• Easy to disassemble, carry, and set-up again
• Multigas measurements in a portable package
• Realtime results reliably and remotely
• Exceptional robustness: shock and vibration resistivity by design
• Smart software with self-diagnostics for easy and fast service
• Suitable for on site or laboratory use.

GT6000 Mobilis Data Sheet
GT6000 Mobilis Brochure

GT6000 Mobilis is designed to be used with the portable sampling system, PSS Plus or PSS Base. PSS utilizes the hot-and-wet measurement principle (no drying or dilution), which ensures that the analysis is done with a representative sample. There is two-stage particulate filtration: the first one in the sampling probe and the second one in the sampling system. The portable sampling system can be optionally equipped with a ZrO2 sensor for accurate oxygen measurement.

With all-new design the user experience has been taken to new heights. Integrated controls on front, 2 handles and cables in the back provide smooth operation. While PSS Base offers more basic design, for more hardcore work we have PSS Plus. PSS Plus comes with flow meters on front and has an instrument air option. This makes the system easier and cheaper for user while also providing safer operation, since nitrogen is only needed for background measurements.

PSS Data Sheet

The post GASMET GT6000 Mobilis appeared first on Thomson Environmental Systems.

Ideal for monitoring air quality outside or in workshops, TES Small Form AQMS measures key parameters:

Air pollutant concentrations: PM₁, PM_2.5, PM₄, PM₁₀, TSP, O₃, NO, NO₂, O3, CO, SO₂, H₂S, NH₃, HCHO, Cl₂, HCl, VOC, CH₄, CO₂ – other gases available on request

Meteorological parameters: temperature, pressure and relative humidity

Other parameters: noise, vibration and odour

Location: GPS

The device captures data in real-time and transfers them wirelessly to a advanced web platform, for data analysis and data management, remote control of the equipment and data integration into websites, software and smart city platforms.

Small form stations are light, compact and easy to install within just a few minutes. Once the stations are connected to the Internet through several communication links on-demand (Wi-Fi, 3/4G, LoRa, Zigbee…), the hyper-localised information is automatically transferred to a secure web platform that is accessible 24 hours a day.

Customize your own Small Form AQMS that meets your needs:

Options:

• Integrate sensors that you need
• Choose your communication link
• Add a back-up battery 

Accessories:

• Solar panel and batteries
• Heating resistance
• Mounting plate

For a wide range of applications:

Smart cities, industrial sites, mining sites, sewage treatment plants, mines, soil remediation, refineries, workshops, warehouses, worksites, road networks, race tracks, ski, and sea resorts.

The post TES SMALL FORM AIR QUALITY MONITORING SYSTEMS (AQMS) appeared first on Thomson Environmental Systems.

Download Specifications

The post TES Continuous Emissions Systems for VOC’s appeared first on Thomson Environmental Systems.

Designed for fast cycle time performance, the Syft Guardian supports up to 32 fully integrated sampling locations with additional ports on request, enabling wide coverage from a single system – it offers unmatched versatility and streamlined data collection.

Engineered for stability and speed, the Syft Guardian ensures rapid detection and confident identification of events, helping automate your monitoring, minimize downtime, and maintain process integrity.

Syft Guardian empowers confident decision-making with 24/7 insight across your entire facility

• Continuous, unattended monitoring across up to 32 sampling ports with additional ports on request. 
• User friendly SyftGuard software for centralised product status, control, data visualisation, customisable alarm systems, remote access, and advanced hardware management.
• Integrated 24” touchscreen PC, complemented by additional keyboard and mouse support for flexible user interaction
• Designed to meet varying site conditions and specialises in semiconductor environments, with integrated light tower and EMO (Emergency Off) button to meet fab safety and operational standards
• Ergonomic design for easy operation and neat on-site integration of power, sample lines, and facility connections
• Flexible integration options with support for additional analysers on request
• Engineered for maximum uptime, with streamlined serviceability and simplified support workflows for minimal operational disruption.

Download Brochure

The post SYFT Guardian appeared first on Thomson Environmental Systems.

HFX205 – Formaldehyde (HCHO)
Reliable electrochemical sensing technology
– Fast response times and wide measuring range.
– Direct real time display in ppm or mg/m3.
– 0 -10 ppm, 0-25ppm & 0-100ppm available.
– Manual and auto data save.
– Optional digital RH and temp sensor available.
– Rechargeable lithium ion battery.

HFX HCO202 – Carbon Dioxide (CO2)
Dual beam, non-dispersive infrared (NDIR) absorption gas technology
– Fast Response.
– Direct real-time digital reading.
– 0.00 – 50,000 ppm.
– <2 second response time.
– Large data storage capacity.
– Optional digital RH and temp sensor available.
– Rechargeable lithium ion battery.

HVX501 – VOCs
Intrinsically safe Photo ionisation detector (PID) detector to detect a wide variety of organic compounds and some inorganic compounds in ambient air.
– 0-2 ppm, 0-20 ppm, 0-200 ppm or -2,000 ppm with varying sensitivity.
– <6 seconds.
– 10.6EV UV Energy Lamp.
– Rechargeable lithium ion battery.
– On board filter to remove particles and liquids.

HCO107 – Carbon Monoxide Meter (CO)
Using electrochemical sensor technology, the HCO107 responds very quickly to ambient changes in CO concentration.
– 0-500 ppm
– T90 <30 seconds response time.
– Direct real time digital reading.
– Rechargeable Li-Ion battery.
– Store up to 500 sets of data.

Download Specifications

The post HAL Technology Handheld Environmental appeared first on Thomson Environmental Systems.

The Gasmet CEMS II e is ideal for measuring trace concentrations of pollutants in wet, corrosive gas streams.

Its typical application is monitoring of waste incinerator or large combustion plants.

Measured gases/particulates and calibration ranges can be changed to suit the application.

All parts of the Gasmet CEMS II e can be heated up to 180 ºC.

It can be used for undiluted gases and the sample gases do not need drying beforehand.

The Gasmet CEMS II e consists of:

• Gasmet FTIR gas analyzer
• Gasmet industrial computer, and
• Gasmet sampling system.

As an option the system can be equipped with ZrO2 oxygen analyzer and/or with total hydrocarbon analyzer (FID). All parts of the system are 19” rack mounted and are installed on the pull-out shelves.

The Gasmet CEMS II e includes all power connections and temperature controllers for heated lines and heated sample probe. Operation of the system is fully automatic and controlled by the Calcmet software. Additionally all functions of CEMS II e can be controlled manually.

Features

• Low need for maintenance – 6-month maintenance interval for all certified compounds
• No span calibrations required (automated span checks possible)
• Hot-extractive-sampling; no sample loss or change of composition
• Capability to water soluble compounds like HCl, HF, NH3, etc.
• TOC (Total Organic Carbon) measured with FTIR – no need for a separated FID
• Fully automated measurement system with comprehensive safety functions
• Ready for future requirements – new compounds can be added without any hardware changes
• Fully modular system built to customer specification
• EN15267 TÜV & MCERTS certificates (QAL1)

Applications

• Waste Incinerators
• Waste to Energy Plants
• Cement Kilns
• Power Plants
• Brick & Glass Manufacturing
• Aluminium and Steel Smelters
• Greenhouse Gas emissions.

Download Specifications

The post GASMET Continuous Emissions Monitoring System (CEMS II e) appeared first on Thomson Environmental Systems.