Speed and Small footprint

With analytical cycles 10 to 50 times faster than traditional chromatographs, the Falcon Series Ultrafast Gas Chromatograph (GC) vastly increases responsiveness for the data consumer in a wide range of lab, process and field applications. Less time spent waiting on results means more productivity and timely control of measured processes. Product output, quality and profitability are increased while field analysis becomes more practical and reliable.​

The Falcon Series GC’s incredible speed inspired a new Ultrafast Simulated Distillation Method. The ASTM D7798 method can perform simulated distillation nearly 6 times faster than the previous method (D2887), with superior repeatability and reproducibility.

The elimination of the air bath column ovens, required for traditional gas chromatography, reduces the Falcon Series GC footprint. Yet the Falcon Series delivers all the functionality of much larger, higher thermal mass, traditional GCs. At 43 cm wide, 22 cm deep, 28 cm high and 11 kg, the Falcon Series offers advanced analytical chemistry in a highly compact, versatile package.​

The smaller size of the Falcon Series GC means more efficient utilization of space and, ultimately, bigger profits for the user. The small Falcon Series footprint allows for higher installation density in the laboratory and enables process installation schemes that place the analyzer much closer to its sampling point in the plant. Closer proximity means less sample lag time as well as more representative measurements for process control. This also makes hand carried and vehicular transport applications far more feasible.​

Smarter

Using modern computing with standard operating systems and software, the Falcon Series GC frees valuable technical resources from the daily grind of interpreting and validating chromatographic results. State-of-the-art Chromperfect® GC operating software is built in and LineUp software virtually eliminates misidentification of components and drastically reduces the need for expensive calibration sample runs. Less time spent calibrating the analyzer means more time spent on more economically valuable diagnostics, most notably measured process deviations from the set-point. In addition to Chromperfect®, Infometrix Pirouette® is an optional software that may be added to enable interface with process automation.​

Easier

Teledyne’s patented direct heating of the temperature-programmed column modules allow the Falcon Series GC to avoid the complicated and troublesome valve schemes used in isothermal process analyzers and many lab gas chromatographs. The Falcon Series GC’s patented overall modular design also makes diverse application engineering and maintenance easier, as column and detector modules are readily changed out as needed.​

Correlation between laboratory systems and online process control systems become realistically possible with the Falcon Series system, because both physical packages use the same measurement principle, hardware and methodology. Applying the Falcon Series GC in-lab and online means less time spent reconciling lab and process measurements and validating which result is correct. More time can be spent working on valuable, direct process optimization.

Greener

Whether in the control laboratory, online in the processing plant, near line in the pilot plant or when transported for field measurements, by consuming less than 300 Watts in operation, the Falcon Series GC uses about 1/10th of the power of traditional GCs.​

With analytical cycles that are many times faster and the low electrical load needed for operation, the Falcon Series GC’s power consumption per analysis is 1% or less of the energy required by traditional gas chromatography. Combine these savings with the reduction in workload for air conditioning systems and the Falcon Series solution is greener still. The Falcon Series product life cycle environmental impact from manufacturing throughout its useful lifetime to disposal is far less than traditional GCs.

The Result​

Faster, Smaller, Smarter, Easier, Greener = better quality, increased productivity, profitability and versatility, with far less hassle and environmental impact. That summarizes the business concept for the ultrafast, compact, ultra-user friendly, energy efficient, highly durable, practical, reliable and economical Falcon Series Ultrafast Gas Chromatograph.​

Falcon GC Brochure

The post Teledyne Falcon Ultrafast Gas Chromatograph appeared first on Thomson Environmental Systems.

For stack testing and emissions monitoring, time is the most important resource; GT6000 Mobilis helps you save it.
Extreme portability, easy setup, fast results – the Gasmet GT6000 Mobilis portable FTIR multi-Component stack gas and emission analyzer is designed for Stack Monitoring with a list of features to make you more efficient.

Key benefits include:

• The first and only FTIR analyzer with MCERTS EN15267-4 certification
• Intuitive user interface and ergonomic design
• Easy to disassemble, carry, and set-up again
• Multigas measurements in a portable package
• Realtime results reliably and remotely
• Exceptional robustness: shock and vibration resistivity by design
• Smart software with self-diagnostics for easy and fast service
• Suitable for on site or laboratory use.

GT6000 Mobilis Data Sheet
GT6000 Mobilis Brochure

GT6000 Mobilis is designed to be used with the portable sampling system, PSS Plus or PSS Base. PSS utilizes the hot-and-wet measurement principle (no drying or dilution), which ensures that the analysis is done with a representative sample. There is two-stage particulate filtration: the first one in the sampling probe and the second one in the sampling system. The portable sampling system can be optionally equipped with a ZrO2 sensor for accurate oxygen measurement.

With all-new design the user experience has been taken to new heights. Integrated controls on front, 2 handles and cables in the back provide smooth operation. While PSS Base offers more basic design, for more hardcore work we have PSS Plus. PSS Plus comes with flow meters on front and has an instrument air option. This makes the system easier and cheaper for user while also providing safer operation, since nitrogen is only needed for background measurements.

PSS Data Sheet

The post GASMET GT6000 Mobilis appeared first on Thomson Environmental Systems.