The Pico N2O/CO is based on Aeris’ revolutionary, miniature laser-based sensor engine, which achieves sub-ppb sensitivity and accuracy in seconds. Self-powered Pico systems can be uniquely employed for a wide range of fixed, handheld, mobile, and drone applications.

The Pico N2O/CO provides precise, accurate and wide range concentration data via the proven method of tunable diode laser absorption spectroscopy. However, Aeris MIRA Series analyzers uniquely operate in the middle infrared (MIR) region, achieving unparalleled specificity and sensitivity in a compact, low power consumption platform. The ability to simultaneously monitor N2O and CO in real-time with a portable analyzer enables a wide range of field applications previously impractical due to traditional size, weight, power, and cost constraints. The Pico N2O/CO represents a paradigm shift in field-able laser-based gas analysis systems.

Key Features:

• Real-time, sub-ppb/s sensitivity
• Autonomous, built-in calibration for CO
• 1 or 2Hz operation
• GPS ready for creating N2O/CO “maps”
• Built-in wifi, RS-232, and optional analog out
• Lowest, 15W power consumption
• Maintenance-free sensor, user-serviceable filters
• Built-in 6hr battery, built-in sampling pump
• Compact, 2.75kg Lab-In-a-Lunchbox^TM

Real-Time Ambient and Source Monitoring

CO is an EPA Priority Pollutant as well as proxy for thermo-genic CO2, while nitrous oxide is the #3 GHG that is produced in combustion processes, livestock operations, and activities such as soil fertilisation. The MIRA Pico N2O/CO provides a powerful new tool for field applications of these important species including regional pollution monitoring (CO) and natural gas leak tracer or soil nitrification studies (N2O). As an absorption-based method, MIRA Pico systems achieve high sensitivity and linearity over an extremely wide concentration range, only requiring zeroing to achieve high accuracy as span does not change after initial calibration. To improve accuracy due to slow instrument drift, Pico systems come equipped with two programmable sample ports and associated software that enable differential measurements to be performed autonomously. In many cases, this built-in differential capability effectively reduces or altogether eliminates the need for expensive calibration gases or zero gas generators.

Download Specifications

The post MIRA Pico N2O/CO appeared first on Thomson Environmental Systems.

Key Features include:

• Superior sensitivity: <200ppt/s N2O , <200ppb/s CO2
• Real-time analytics, statistics
• Fast response time
• Hermetically sealed sensor core keeps optics clean
• 1 or 2 Hz operation standard, up to 10Hz optional
• High accuracy GPS, compact antennae
• Wi-Fi, RS232, data streaming capability
• Low power consumption, battery or drone powered
• Robust platform: 100x less sensitive to contamination than “cavity-based” systems
• Water vapour measured to report dry mole fractions
• Data in .kml format for viewing in Google Earth.

Download Specifications

The post MIRA Strato N2O/CO2: UAV/Drone appeared first on Thomson Environmental Systems.

For stack testing and emissions monitoring, time is the most important resource; GT6000 Mobilis helps you save it.
Extreme portability, easy setup, fast results – the Gasmet GT6000 Mobilis portable FTIR multi-Component stack gas and emission analyzer is designed for Stack Monitoring with a list of features to make you more efficient.

Key benefits include:

• The first and only FTIR analyzer with MCERTS EN15267-4 certification
• Intuitive user interface and ergonomic design
• Easy to disassemble, carry, and set-up again
• Multigas measurements in a portable package
• Realtime results reliably and remotely
• Exceptional robustness: shock and vibration resistivity by design
• Smart software with self-diagnostics for easy and fast service
• Suitable for on site or laboratory use.

GT6000 Mobilis Data Sheet
GT6000 Mobilis Brochure

GT6000 Mobilis is designed to be used with the portable sampling system, PSS Plus or PSS Base. PSS utilizes the hot-and-wet measurement principle (no drying or dilution), which ensures that the analysis is done with a representative sample. There is two-stage particulate filtration: the first one in the sampling probe and the second one in the sampling system. The portable sampling system can be optionally equipped with a ZrO2 sensor for accurate oxygen measurement.

With all-new design the user experience has been taken to new heights. Integrated controls on front, 2 handles and cables in the back provide smooth operation. While PSS Base offers more basic design, for more hardcore work we have PSS Plus. PSS Plus comes with flow meters on front and has an instrument air option. This makes the system easier and cheaper for user while also providing safer operation, since nitrogen is only needed for background measurements.

PSS Data Sheet

The post GASMET GT6000 Mobilis appeared first on Thomson Environmental Systems.