Since the M&C dilution probe SP2000-H/DIL is based on the well-proven M&C gas sample probe SP2000H, a variety of applications requiring special filter techniques, materials, etc. can be handled without any problems with this dilution probe.

Gas sample dilution probe type SP2000‑H/DIL features:

• external ceramic filter type S‑2K150
• filter porosity: 2 µm
• electrically heated external filter from 0 to 180 °C, adjustable by an integrated thermostat
• high‑temperature limiter with reset key responding at +30 °C above Tset and low‑temperature alarm with potential‑free status‑alarm contact at ‑30 °C below Tset,
• incl. weather protection shield with insulation
• power: 230 V/50 Hz, 800 W
• mounting flange: DN 65 PN 6B with G 3/4″ f connection
• sample gas OUT: 8‑mm‑tube
• material: SS 316Ti, ceramic, Viton®
• Dilution ratio to be indicated with the order

Gas Sample Dilution Probe SP2000-H/DIL brochure

The post Gas Sample Dilution Probe SP2000-H/DIL appeared first on Thomson Environmental Systems.

Gas Sample Probe SP4000-H brochure

The post Portable Gas Sample Probe PSP4000-H appeared first on Thomson Environmental Systems.

Gas Sample Probe Series SP®Versions SP2000, SP2000-H, SP2300-H, SP2400-H range brochure

The post Gas Sample Probe SP2000-H appeared first on Thomson Environmental Systems.

Information

The CEMTEC^® gas sampling probe system was developed for continuous analysis of flue gas in cement plant rotary kiln inlets and other extremely dusty, high temperature processes such as in lime plants with the goal of increasing product quality with reduced fuel usage while simultaneously reducing harmful emissions.

With the increasing usage of alternative fuels in rotary kilns and large combustion chambers, on-site gas analysis has become more important.
In addition, stringent emission targets worldwide are driving the need for quality continuous process measurement and SNCR control for NO_x reduction.

Process temperatures up to 1400°C, dust concentrations of up to 2000 ^g/_m³, high mechanical stress and ambient temperatures up to 50°C make extreme demands on any equipment. CEMTEC^® unique features provide an optimal solution for uninterrupted measurement under challenging conditions as found in kiln inlet chambers.

The CEMTEC^® is self-cleaning which enables 95% availability of measurement during operation. In addition to the InSitu sensors for oxygen and CO_eanalysis, extractive analyzers are supplied with dust free flue gas for measurement of e.g. SO₂, NO_x or CO₂.

Due to its mechanical cleaning, continuous extraction and analysis of process gas is possible over a long period of time: The plunger at the gas inlet removes any deposits or blockages, keeping the gas inlet free. The patented swivel drive continuously rotates the probe in programmable intervals and prevents deformation of the probe tube and enables probe retraction at any time.

Applications

• Cement plants
• Lime plants
• High temperature, high dust applications

Features

• 95 % availability of measurement
• Swivel drive
• Automated self cleaning
• Automatic emergency retraction
• Optional InSitu O₂ / CO_e analysis
• Air-Coolant or Water-Coolant probe cooling

Download Specifications

The post Enotec CEMTEC appeared first on Thomson Environmental Systems.