M&C Tech Group Archives - Thomson Environmental Systems https://thomsongroup.com.au/product-brands/mc-tech-group/ Tue, 03 Jun 2025 03:14:41 +0000 en-AU hourly 1 https://wordpress.org/?v=6.9 https://thomsongroup.com.au/wp-content/uploads/2022/03/cropped-TES_favicon-32x32.png M&C Tech Group Archives - Thomson Environmental Systems https://thomsongroup.com.au/product-brands/mc-tech-group/ 32 32 Gas Sample Dilution Probe SP2000-H/DIL https://thomsongroup.com.au/product/gas-sample-dilution-probe-sp2000-h-dil/ Fri, 23 Jun 2023 05:35:39 +0000 https://thomsongroup.com.au/?post_type=product&p=20021 The electrically heated M&C dilution probe is used in processes where the measuring procedure or the handling of the process gas requires the dilution of the sample gas or the component(s) to be measured, e.g. for extremely toxic gases, for moisture or emission measurement in flue gases. Since the M&C dilution probe SP2000-H/DIL is based […]

The post Gas Sample Dilution Probe SP2000-H/DIL appeared first on Thomson Environmental Systems.

]]> The electrically heated M&C dilution probe is used in processes where the measuring procedure or the handling of the process gas requires the dilution of the sample gas or the component(s) to be measured, e.g. for extremely toxic gases, for moisture or emission measurement in flue gases.

Since the M&C dilution probe SP2000-H/DIL is based on the well-proven M&C gas sample probe SP2000H, a variety of applications requiring special filter techniques, materials, etc. can be handled without any problems with this dilution probe.

Gas sample dilution probe type SP2000‑H/DIL features:

  • external ceramic filter type S‑2K150
  • filter porosity: 2 µm
  • electrically heated external filter from 0 to 180 °C, adjustable by an integrated thermostat
  • high‑temperature limiter with reset key responding at +30 °C above Tset and low‑temperature alarm with potential‑free status‑alarm contact at ‑30 °C below Tset,
  • incl. weather protection shield with insulation
  • power: 230 V/50 Hz, 800 W
  • mounting flange: DN 65 PN 6B with G 3/4″ f connection
  • sample gas OUT: 8‑mm‑tube
  • material: SS 316Ti, ceramic, Viton®
  • Dilution ratio to be indicated with the order

Gas Sample Dilution Probe SP2000-H/DIL brochure

 

The post Gas Sample Dilution Probe SP2000-H/DIL appeared first on Thomson Environmental Systems.

]]> Portable Gas Sample Probe PSP4000-H https://thomsongroup.com.au/product/portable-gas-sample-probe-psp4000-h/ Thu, 04 May 2023 22:52:41 +0000 https://thomsongroup.com.au/?post_type=product&p=19977 Portable gas sample probe type PSP4000‑H with external ceramic filter type S‑2K, filter porosity: 2 µm, electrically heated external filter 100 to 180 °C adjustable by an integrated thermostat with indicator light (standard: 180 °C), 7‑pin plug with 4 m connection cable and mains plug, thermally insulated housing with carrying handle and chain incl. mounting […]

The post Portable Gas Sample Probe PSP4000-H appeared first on Thomson Environmental Systems.

]]> Portable gas sample probe type PSP4000‑H with external ceramic filter type S‑2K, filter porosity: 2 µm, electrically heated external filter 100 to 180 °C adjustable by an integrated thermostat with indicator light (standard: 180 °C), 7‑pin plug with 4 m connection cable and mains plug, thermally insulated housing with carrying handle and chain incl. mounting clamp for connecting the heated sample line, gas inlet: G 3/8″ f, gas outlet: G 1/8″ NPT with tube connector 6 mm, power: 230 V/50 Hz, 200 W, material: SS 316Ti, ceramics, Viton®

Gas Sample Probe SP4000-H brochure

The post Portable Gas Sample Probe PSP4000-H appeared first on Thomson Environmental Systems.

]]> Gas Sample Probe SP2000-H https://thomsongroup.com.au/product/gas-sample-probe-sp2000-h/ Thu, 04 May 2023 05:57:24 +0000 https://thomsongroup.com.au/?post_type=product&p=19972 Gas sample probe type SP2000‑H with external ceramic filter type S‑2K150, filter porosity: 2 µm, with electrically heated external filter 0 to 180 °C, adjustable by an integrated thermostat, high‑temperature limiter with reset key responding at +30 °C Tset and low‑temperature alarm with potential‑free status‑alarm contact at ‑30 °C below Tset, incl. weather protection shield […]

The post Gas Sample Probe SP2000-H appeared first on Thomson Environmental Systems.

]]> Gas sample probe type SP2000‑H with external ceramic filter type S‑2K150, filter porosity: 2 µm, with electrically heated external filter 0 to 180 °C, adjustable by an integrated thermostat, high‑temperature limiter with reset key responding at +30 °C Tset and low‑temperature alarm with potential‑free status‑alarm contact at ‑30 °C below Tset, incl. weather protection shield with insulation, power: 230 V/50 Hz, 800 W, mounting flange: DN 65 PN 6B with G 3/4″ f connection, sample gas OUT: 1/4″ NPT f, material: SS 316Ti, ceramic, Viton®

Gas Sample Probe Series SP®Versions SP2000, SP2000-H, SP2300-H, SP2400-H range brochure

The post Gas Sample Probe SP2000-H appeared first on Thomson Environmental Systems.

]]>