With new digital architecture and improved automation, the G8 improves on the very stable and easy to use G4 platform and user interface.

Warning and alarm messages are sent to your phone via G8 app, so you have total control any time, anywhere!

New internal components provide significant weight and footprint reductions for better handling/transportability which improves user productivity in sampling platforms with limited space.

Features

• Connection with online analyzer to acquire CO2 and O2 data for an accurate and real time gas density calculation (optional). Also other pollutants can be archived in a dedicated report
• Advanced digital high resolution differential pressure sensors with near zero drift. High temperature stability over the sampling period
• Fixed point stack gas speed measure as required from ISO16911-1
• Automatic unattended sensor verification
• Wide resistive touch screen. any type of touching material can manage it (gloves, pen, etc). All the informations are available in a clear high res view
• Connection with swirl angle meter to verify the flow as required from ISO16911-1 (optional)
• Background diagnostic test procedure to ensure total efficiency during sampling
• USB interface to download data
• Total isokinetic control within the standard limits with very fast response and high flow stability even in the most unstable stack gas speed conditions
• Volume measurement with dry gas meter
• Sampling flow measurement with venturi flow meter
• In-stack temperature and velocity measurement
• Wide duct library to archive all site data
• Data logger function with saving data on internal memory or external USB key (supplied with the instrument)
• Very high MTBF which results in low maintenance and low spares cost
• All sensors can be calibrated as required from ISO17025
• Auto check at starting
• Leak test in line during sampling using an O2 sensor
• Log measurements and alarms
• Automatic re-start in case of flue gas velocity alarm.

Download Brochure

The post TECORA Isokinetic G8 appeared first on Thomson Environmental Systems.

• It allows Calibration traceability of each sensor and measured parameter.
• Isostack G4 stores each calibration performed by the user and the manufacturer.
• The report is downloadable via USB.
• Calibration curve on 5 points for each sensor and acquired width.
• Correction curve on 5 points programmable by customer for each sensor.
• Allows you to adjust deviations found during recalibration.
• Volume measurement redundancy via a mass and a volume meter
• Auto-calibration function allows you to verify the calibration of flow and volume measurement elements and eventually to adjust them to an external reference.
• High-precision pressure sensor with thermal drift compensation.
• Thermocouple calibration curve following ITS 90 standard.

Features

• In accordance with UNI EN13284-1, EN 10169 and USEPA M5, M17
• Fast isokinetic control at any stack condition
• In-stack temperature and velocity measurement
• USB interface to download data<
• Wide Graphic Display
• High precision pressure calibrator, with thermal drift compensation device
• Wide library with specifications of the most common ducts
• Data logger function with saving data on USB key (supplied with the instrument)
• Reduced maintenance
• Available with ISO 17025 accredited laboratory certificate

Parameters saved on Isostack G4 Reports:

• Instrument’s serial number
• Sampling date/hour
• Duct’s temperature
• Duct’s absolute pressure
• Flue gas velocity
• Duct’s flow
• Duct’s parameter
• Sampling duration
• Atmospheric pressure
• Sampling line pressure
• Sampled volume
• Nozzle’s flowrate
• Sampler’s range
• Isokinetic deviation
• Heated box temperature
• Heated probe temperature
• Condensation bath temperature
• Condensation bath’s gas outlet temperature

Download Data Sheet

The post TECORA Isostack G4 appeared first on Thomson Environmental Systems.